DIN / EN / ASTM / BS Butt Weld Fittings Elbow Reducer Tube End Caps
UNS NO. C10100, 10200, 10300, 10800, 12200, 70600 / CU NI 90/10 Butt Weld Fittings Elbow Tee Reducer Pipe End Cap
Standard: ASTM / ASME SB 111 / 466/ASTM A403
Grade: UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600 ( CU -NI- 90/10) , 71500
( CU -NI- 70/30).
Buttweld Cap Fitting
The function of a Buttweld End Cap Fitting is to block off the end of a line in a piping system. The Buttweld
Cap is fitted by placing the end cap over the open line and welding around the joint.
Buttweld Stub End Fitting
Stub Ends are installed in pairs and mated together with two Lap Joint Flanges. The surface of the stub end
has a phonographic serrated gasket surface which prevents leakage at the joint. Using stub ends allows
sections of the line to be opened for cleaning, inspection or quick replacement etc, without the need to re-weld.
Eccentric / Concentric Reducer Fitting
There are two options available, of Concentric Reducer or Eccentric Reducer.
An Eccentric Reducer, also called a Bell reducer, has two female (inside) threads of different sizes with centers
so designed that when they are joined, the two pieces of pipe are not in line with each other, but they can be
installed so as to provide optimum drainage of the line.
The fitting is designed with the smaller outlet off center to the larger end, allowing it to align with only one side
of the inlet. The reducer fittings are designed to be welded with ease and offer superior strength and leak
resistance.
Eccentric Reducer must be installed with straight side up to prevent trapping air at the pump suction. They are
designed to allow simple connection of different sized pipes. These can be used as pipe reducers, flexible
connectors and vibration eliminators.
Eccentric Reducers eliminate noise and isolate vibration in the pipeline, reduces stress, eliminates electrolysis
and protects against start-up surges.
A Concentric Reducer joins the tube sections on the same axis. They connect unequal size pipes that have a
common centerline and are used for TC transitions in vertical tubing.
A Concentric Reducer has different size ends to mate hose or tubing of different diameter that joins tube
sections on the same axis. Since virtually all piping systems go through changes in diameter either in the run
or at the equipment connections, a reducer serves the dual purpose of changing the piping diameter and at the
same time that of handling the expansion, misalignment or vibration problem.
While there are published transition sizes and face to face dimensions, it is seldom that the cataloged sizes
refer to what is required on the jobsite. Hence, the face to face dimensions as well as the two flange sizes are
varied to fit the application. Thus, Custom reducers are easily manufactured as per the specifications.
1.1.1 Dimensions for Buttweld Fittings:
- BS 1640/ANSI - ASME B16.9 - B16.28 - B16.25
- Seamless, EFW, ERW, DSAW and Forged
1.1.2 Material Grades for Buttweld Fittings
All buttweld fittings are available in the following material grades:
· Stainless Steel
· A403 304/L 310 316/L 321/H 347/H 410440 904L
· Carbon Steel
· A234 WPB, WPC
· Low Temperature Steel
· A420 WPL6, WPL3
· Alloy Steel
· A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91
· High Yield
· WPHY42, 52, 60, 65, 70
· Duplex & Super Duplex
· A815 UNS 31803, UNS 31254, UNS S32750 UNS S32760
· Nickel Alloys
· 200, 400, K500, 600, 625, 800, 825
· Alloys
· ALLOY 20 ALLOY C ALLOY C276 ALLOY B2
· Aluminium
· 5083, 5154, 5251, 6061, 6063, 6082
· Unusual Grades
· Bronze, Brass, Copper
· Cupro Nickel
Titanium
Product Tags:
|
|
DIN / EN / ASTM / BS Butt Weld Fittings Elbow Reducer Tube End Caps Images
|
